I was recently in the US for the holiday season, and I was looking for a silverware dish that would compliment my table.
I looked through the Pinterest board for silverware dishes and saw this one by Mango & Co, but I couldn’t find it in my local grocery store.
I was intrigued and decided to make my own.
In order to make this dish, you need a wooden tray that will be easy to carry around the house, as well as a silver dish that you will have to eat.
To start, you will need to take out some glass or copperware, as there is nothing that comes pre-tinned for silver dishes, so it might be a little pricey.
Cut your silver into 6 equal pieces, then make a strip to attach to the bottom of the silver tray.
Place the silver on top of the copper piece, making sure to keep the edge of the tray as level as possible.
Attach the silver strip to the back of the glass dish, so that the silver is in contact with the back.
Make sure that the tray is level, so you can get a good look at how many silver pieces you have left.
Remove the silver from the tray, then fold the silver piece in half to make it a single piece of silver.
You will now have 12 silver pieces in your silver tray, and you can add a few more to make the dish a little bigger.
Put the silver dish on the tray and make sure that it is level with the bottom, as the silver will have an uneven surface.
Now, lay the silver cloth on the plate, and cut a hole in the silver with your knife, so the silver can slide through the hole without touching the silver plate.
Using a sharp knife, cut a slot for the silver to slide into.
Then, use a sharp object to cut a slit in the side of the plate so that it can slide into the slot.
When you are done cutting the silver, use the knife to scrape the silver into the silver slot, so there is no longer any loose silver.
Use your silver cutting board to cut out the slots that are left on the silver.
When all of the slots are cut, you can now add a silver plate to the silverware to make your silver dish.
Step 3: Preparing the silver foil article The silver foil you just bought can be used to make decorative silverware, but this silver dish is a bit more expensive.
Here is what you need to do to make silver foil: 1.
Purchase silver from a local jewelry store.
Measure the diameter of your silver plate, which should be around 4.5″ (10cm) long.
Take out your silver foil and cut it into six equal pieces.
Place the silver pieces on top and then cut a piece to attach it to the tray.
Using a sharp kitchen knife, make a small slit in one of the 6 pieces of silver foil.
Using your knife to cut the silver slit in half, you now have a small opening in the foil, and this will allow you to slide the silver through the opening.
Place a small amount of the foil on top.
Cut a small hole in this hole and attach the silver plates to the plate.
Place your silver on the table and then repeat step 3.
Now you are ready to add silver plates and silver foil to the dish.
This dish is easy to make and requires very little time, but be careful when preparing the silver because it is still very fragile.
I hope you enjoyed this post!
Leave a comment below and let me know if you make this recipe, so I can see what you think!